China Pulley for Overhead Conductor Extension pulley drive

Product Description


                                                                   U Clamp
Element 1       Standard
one.01       SCOPE
This Specification covers the style, producing, tests offer, shipping and delivery and efficiency demands of D Bracket for use on overhead networks.
1.02       STHangZhouRDS
The fittings comply with the most current editions of, and amendments to, the standards outlined below:
BS                                                     –      British Specifications Establishment
BS 3288                                     –      Insulator and Conductor Fittings for Overhead Power Traces
BS EN ISO 1461                   –  Very hot Dip Galvanized Coatings on Iron and Steel Content articles
VDE                                                  –      Verband Deutscher Elecktrotechniker
VDE 5712                                  –      Specifications for aluminum for Electrical Technology 
DIN                                                 –      Deutsche Industrie Normen
DIN 6796                                   –      CZPT spring Washers
1.03     Support Circumstances
Appropriate for out of doors use in the Tropical zone,with a optimum ambient temperature of approximately 30degrees centigrade with hefty rainfall and higher humidity of approximately a hundred% .
one.04     Program Problems
Comply the Consumer requirment.
one.05     Tests
A.        Program Tests
1.         Program tests carried out on all models of a distinct type.
2.         Mechanical routine testing will be carried out in accordance with BS 3288 Portion 1.
three.         The results of these tests will be recorded on a Program Examination Certificate.
four.         Program Check Certificates will incorporate, in addition to the test final results, the Purchaser’s Order Quantity.
B.        Type Assessments
1.         Kind assessments will be carried out on specific units of a specific variety.
2.         Variety checks will be in accordance with BS 3288: Part 1.
C.        Sample Tests
one.         Approach of sampling and testing and test parameters shall be in accordance with BS 3288: Part 1.
2.         Examination outcomes shall be recorded in the exact same fashion as schedule checks.
D.        Inspection
The Purchaser reserves the correct to witness the producing process, any type checks especially carried out on the insulators to be supplied to ECG and any routine exams essential in the manufacture and offer of the insulators and fittings. The Provider shall give cost-free access to the Purchaser to any web site the place these kinds of production procedure, or checks, possibly sort or routine assessments are having place.  The Provider shall bear the in plant expenses of these kinds of inspection.  The Provider shall provide the Purchaser of a plan of manufacture and exams at minimum 2 months before the activities are to occur.
one.06       SPARES
(Not Relevant)
one.07       PACKING AND Shipment
Export Regular
one.08       SUBMITTAL
As specified Of Customer
Element 2           PRODUCTS         
2.01     Layout
In accordance to the Drawing Attach


US $11
/ Piece
1 Piece

(Min. Order)


Transport Package: Cartons Pallets Wooden Case
Specification: IEC IEEE
Trademark: OEIpower
Origin: China Nanyang


US $11
/ Piece
1 Piece

(Min. Order)


Transport Package: Cartons Pallets Wooden Case
Specification: IEC IEEE
Trademark: OEIpower
Origin: China Nanyang



The importance of pulleys

A pulley is a wheel that rides on an axle or axle. The purpose of the pulley is to change the direction of the tensioning cable. The cable then transfers the power from the shaft to the pulley. This article explains the importance of pulleys and demonstrates several different uses for this machine. Also, see the Mechanical Advantages section below for the different types. let’s start.

simple machine

A simple pulley machine is a device used to transfer energy. It consists of a wheel with flexible material on the rim and a rope or chain tied to the other end. Then lift the load using the force applied to the other end. The mechanical advantage of this system is one, as the force applied to the load is the same as the force on the pulley shaft.
A simple pulley machine has many benefits, from the ability to build pyramids to building modern buildings with it. Pulleys are also popular with children because they can perform simple tasks such as lifting toys onto a slide, sliding them off the slide, and lifting them up again. These activities, called “transportation” by child development theorists, allow them to learn about the physics of simple machines in the process.
The mechanism works by using cables to transmit force. The cable is attached to one side of the pulley and the other side is pulled by the user. Lift the load by pulling on one end and the other end of the rope. Simple pulley machines have many commercial and everyday applications, including helping move large objects. They can be fixed or movable, and can be a combination of both. The present invention is a great tool for any beginner or engineer.


The axle wheel is the basic mechanical part that amplifies the force. It may have originally appeared as a tool to lift buckets or heavy objects from a well. Its operation is demonstrated by large and small gears attached to the same shaft. When applied to an object, the force on the large gear F overcomes the force W on the pinion R. The ratio of these two forces is called the mechanical advantage.
The ideal mechanical advantage of shaft pulleys is their radius ratio. A large radius will result in a higher mechanical advantage than a small radius. A pulley is a wheel through which a rope or belt runs. Often the wheels are interconnected with cables or belts for added mechanical advantage. The number of support ropes depends on the desired mechanical advantage of the pulley.
In the design of the axle wheel, the axle is the fulcrum and the outer edge is the handle. In simple terms, wheels and axle pulleys are improved versions of levers. The axle pulley moves the load farther than the lever and connects to the load at the center of the axle. Shaft pulleys are versatile and widely used in construction.

rope or belt

Ropes or pulleys are mechanical devices used to move large masses. The rope supports a large mass and can be moved easily by applying a force equal to one quarter of the mass to the loose end. Quad pulleys have four wheels and provide the mechanical advantage of four wheels. It is often used in factories and workshops. It is also a popular choice in the construction industry. If you are installing a pulley in your vehicle, be sure to follow these simple installation instructions.
First, you need to understand the basics of how a rope or pulley works. The machine consists of one or more wheels that rotate on an axle. The rope or belt is wrapped around the pulley and the force exerted on the rope is spread around the pulley. It then transfers the force from one end of the rope to the other. The pulley system also helps reduce the force required to lift objects.
Another common rope or pulley is the differential pulley. This is similar to a rope pulley, but consists of two pulleys of different radii. The tension in the two halves of the rope supports half the load that the live pulley should carry. These two different types of pulleys are often used together in composite pulley systems.

Mechanical advantage

The mechanical advantage is the ratio of the force used to move the load through the pulley system to the force applied. It has been used to measure the effectiveness of pulley systems, but it also requires assumptions about applied forces and weights. In a simple 1:1 pulley system, the weight lifting the weight is the same as the weight of the person pulling the weight. Adding mechanical advantage can help make up for the lack of manpower.
This advantage stems from the mechanical properties of simple machines. It requires less force and takes up less space and time to accomplish the same task. The same effect can also be achieved by applying less force at a distance. Furthermore, this effect is called the output force ratio. The basic working principle of a pulley system is a rope with a fixed point at one end. The movable pulley can be moved with very little force to achieve the desired effect.
The load can be moved through the vertical entry using a simple pulley system. It can use a simple “pulley block” system with a 2:1 “ladder frame” or a 4:1 with dual pulleys. This can be combined with another simple pulley system to create a compound pulley system. In this case, a simple pulley system is pulling another pulley, giving it a 9:1 mechanical advantage.

Commonly used

You’ve probably seen pulley systems in your kitchen or laundry room. You probably already use it to hang clothes on an adjustable clothesline. You may have seen motor pulleys in the kitchens of commercial buildings. You might even have seen one on a crane. These machines use a pulley system to help them lift heavy loads. The same goes for theaters. Some pulleys are attached to the sides of the stage, enabling the operator to move up and down the stage.
Pulley systems have many uses in the oil and petroleum industry. For example, in the oil and gas industry, pulley systems are used to lay cables. They are arranged in a pulley structure to provide mechanical energy. When the rope is running, two pulleys are hung on the derrick to facilitate smooth running. In these applications, pulleys are very effective in lifting heavy objects.
A pulley is a simple mechanical device that converts mechanical energy into motion. Unlike chains, pulleys are designed to transfer power from one location to another. The force required to lift an object with a pulley is the same as that required by hand. It takes the same amount of force to lift a bucket of water, but it’s more comfortable to pull sideways. A bucket of water weighs the same as when lifted vertically, so it’s easy to see how this mechanism can be useful.

Safety Notice

When using pulleys, you should take several safety precautions to keep your employees and other workers on the job site safe. In addition to wearing a hard hat, you should also wear gloves to protect your hands. Using pulleys can lead to a variety of injuries, so it’s important to keep these precautions in mind before using pulleys. Here are some of the most common:
Pulleys are an important piece of equipment to have on hand when lifting heavy objects. Pulleys not only reduce the force required to lift an object, but also the direction of the force. This is especially important if you are lifting heavy objects, such as a lawn mower or motorcycle. Before starting, it is important to make sure that the anchoring system can support the full weight of the object you are lifting.
When using a pulley system, make sure the anchor points are adequate to support the load. Check with the pulley manufacturer to determine the weight it can safely lift. If the load is too large, composite pulleys can be used instead. For vertical lifts, you should use a sprocket set and wear personal protective equipment. Safety precautions when using pulleys are critical to worker health and safety.

China Pulley for Overhead Conductor Extension     pulley driveChina Pulley for Overhead Conductor Extension     pulley drive
editor by czh 2022-12-07